Cook's Tackle Systems | Product Information

Cook's Go-To Tackle Storage System is a revolutionary new system that converts the dead space under the deck compartment lids of your boat into highly usable, exceptionally convenient storage space. These unique, new organizers are perfect for storing spinner baits and well as a multitude of packaged baits. When your deck lids are open, baits stored in the organizers may be easily taken in and out, however, when the lids are closed, all baits are securely locked into place keeping them tangle free, even in rough water. The diagrams below better illustrate how Cook's Go-To Tackle Storage System works.

How It Works How It Works 1 How It Works 2 How It Works 3 How It Works 4

Installation Instructions

Most users can use this installation method

INSTALLATION INSTRUCTIONS -- NO DRILLING REQUIRED*

FOR BOATS WITH SMOOTH FIBERGLASS UNDER THE LIDS such as Ranger, BOATS WITH EXPOSED METAL CHANNEL UNDER THE LIDS such as Triton, and BOATS WITH SMOOTH METAL UNDERSIDES OF LIDS such as Rebel you can use 3m double sided tape (3m brand Scotch exterior mounting tape #4011T)...red label (not included with package). Clean both surfaces with alcohol, apply tape to the Cook's Tackle System, then to your mounting surface This method is not recommended for underside with carpet or foam padding.

INSTALLATION INSTRUCTIONS -- Pro's Soft Bait Glue*
For those of you who prefer not to drill into your boats, Pro's Soft Bait Glue, a great product for your soft plastic baits, is also a quick and easy way to mount your Cook's GO-TO Tackle Storage System. This glue is now available on our site. Shipping is free with purchase of the Cook's GO-TO System. See installation instructions.
Mounting instructions for using the Pro's Soft Bait Glue:

Lightly sand mounting area, clean with alcohol.
Lightly sand mounting surface of Cook's GO-TO Tackle Storage System.
Be sure you have clearance for racks and baits.
Be sure you have the Cook's GO-TO Tackle Storage System where you want it--once in place, it cannot be moved.
"Lightly" apply the Pro's Soft Bait Glue onto the Cook's
GO-TO Tackle Storage System and mount to surface.

* Pro's Soft Bait Glue Sold Separately.

(Mounting Hardware Included) Installation Instructions 2

Alternate Installation Method
(Mounting Hardware Included) Installation Instructions 1

NOTE:* It has been brought to our attention that many people really like our Tackle Storage System, but when it comes to drilling the 11/64" diameter holes, and installing the two #6 screws they are very concerned that the screw heads will be visible. We intentionally downsized the mounting screws to a #6 screw so the head would be small & disappear in the carpet when tightened. If the instructions on the package card are followed this will not be a problem. Pick the carpet fibers out from under the screw head prior to tightening the screws, then as the screws are tightened the rubber backing of the carpet will yield and the fibers will pull over the screw heads concealing them very well. This rubber backing will also seal the screw from any leakage from rain.